Jim’s 6mm Oak Hybrid

6mm SPC Hybrid Flooring with 0.55mm Wear Layer

Jim’s 6mm SPC hybrid flooring delivers the full hybrid package in a versatile thickness that suits a wide range of residential and commercial applications. The 5mm Stone Plastic Composite core resists moisture absorption completely and refuses to expand or contract with temperature and humidity changes. Furthermore, the SPC core bridges minor subfloor imperfections without telegraphing them to the surface, so preparation requirements stay lower than less rigid constructions demand.

Why 6mm SPC Hybrid Flooring Works Better in Renovation Projects

At 6mm, this SPC hybrid flooring manages height transitions, existing thresholds, and door clearances more easily than 7mm or 8mm alternatives. As a result, it suits renovation and overlay applications particularly well, the existing built environment sets constraints, and 6mm works within them rather than around them.

0.55mm Wear Layer and Surface Finish

The 0.55mm wear layer sits at the upper end of the 6mm hybrid category. Consequently, the floor handles sustained residential and commercial traffic with confidence. The low gloss polyurethane UV cured coating adds ceramic bead reinforcement for additional hardness. Moreover, the light embossing surface finish gives the floor a tactile quality that flat surfaces don’t achieve, making the timber-look visual more convincing underfoot than in photographs.

12 Colours and Pre-Attached Underlay

Twelve colours run from cool Platinum Haze and Arctic Storm through mid-tone Grey Wolf and Ashwood to warm Goldrush, Terracotta, and Spotted Gum. Additionally, the pre-attached 1mm Dunlop foam backing removes the need for separate underlay on floating installations. The Unilin angle to angle joining system locks each plank cleanly into place.

6mm SPC Hybrid Flooring, General Specifications

Technical Specifications

Available Colours