7mm Oak XL Hybrid

XL SPC Hybrid Flooring at 228mm Wide

Jim’s 7mm Oak XL Hybrid is an XL SPC hybrid flooring product that leads with width, 228mm per plank, compared to the standard 180mm. That extra width means fewer longitudinal joins, a more expansive floor surface, and enough face area to show the oak pattern, colour variation, and surface texture convincingly. Furthermore, the 6mm SPC core resists moisture absorption, temperature change, and dimensional movement, so the floor stays flat and stable across Australian conditions year-round.

0.55mm Wear Layer and Surface Finish for

XL SPC Hybrid Flooring

At 0.55mm, the wear layer sits at the upper end of the 7mm hybrid category. As a result, XL Hybrid handles both residential and commercial traffic confidently. The low gloss polyurethane UV cured coating adds ceramic bead reinforcement for additional surface hardness. Moreover, the Embossed in Register finish aligns physical texture with the printed oak grain beneath, so the floor feels like timber, not just looks like it.

Pre-Attached Underlay and Easy Installation

The 1mm Dunlop high density foam backing comes pre-attached, so there’s no need to source separate underlay on floating installations. Additionally, the Unilin angle to angle joining system locks cleanly and consistently. Consequently, installation stays straightforward from the first plank to the last.

8 Colours and Full Compliance

Eight colours run from warm Duskwood and Autumn Grain through to cooler Tidal Grey and Cloudwood, a palette that suits any interior direction. The floor carries E0 formaldehyde, Sensitive Choice, and Best Environmental Practice PVC approvals, plus D1, P4, and R10 slip ratings for full residential and commercial compliance.

XL SPC Hybrid Flooring, General Specifications

Technical Specifications

Available Colours